Overview
![Photoplotter](http://www.vanderbilt.edu/vinse/wp-content/uploads/sites/40/2024/03/photoplotter.jpg)
The Bungard Filmstar-PLUS Photoplotter is a stand-alone system that can fabricate plastic masks for photolithography and microfluidics through a high resolution laser and photo paper. The photoplotter is capable of writing bright and dark field masks. The photoplotter works with Gerber, Extended Gerber, Hi-Res BMP file formats. Conversions to and from these formats are also offered through LinkCAD, Gerber2Bitmap, and Filmstar-PLUS in the cleanroom. Files are converted from AutoCad (DXF) and L-edit (GDSII) as a VINSE staff service as part of the mask fabrication process. All masks are printed by VINSE Cleanroom Staff unless otherwise specified.
Capabilities
- Maximum plot size: 230 x 380 mm
- Maximum film format: 250 x 380 mm
- Speed: 7 mm of film width/minute at 2032 dpi (at lowest resolution possible)
- Light source: Laser-diode 670 nm (red)
- Maximum resolution: 16256 (X-axis) x 25400 (Y-axis) dpi
Contact
-
VINSE Cleanroom
Dr. Ben Schmidt, Manager
Dr. Christina McGahan
Megan Dernberger- 111 Engineering Science Building